http://www.qualitytolast.com/fx2012mt.html

OutBack FX2012MT Inverter/Charger

OutBack FX2012MT, 2000 Watts 12 Volts 120 VAC/60 Hz, Off Grid Inverter, Pure Sine Wave (Turbo included)

80 Amp Charger Mobile Sealed Turbo M-Series Sealed inverter for Marine-Mobile Applications.The Outback M-Series inverter/charger is an all-in-one mobile power solution. It incorporates a true sinewave inverter, intelligent battery charger and an AC transfer switch which includes a 30 amp pass through and automatic neutral/ground switching.All M-series inverter/chargers produce virtually distortion free AC power for all your mobile electrical needs. Industry leading surge power starts multiple heavy loads simultaneously without the need to run your generator. Innovative power factor corrected battery charging uses multiple stages to charge your batteries quickly so your generator runs less. Ultra fast AC transfer switch with battery charger back off circuitry allows you to seamlessly take full advantage of your shore cord.

Outback's modular design makes expanding your power system as easy as adding an additional inverter/charger. Integrated network communications makes system setup and monitoring easy through a single MATE2M controller. Very quiet operation allows mounting in noise sensitive areas, even under a bunk. Repairs in field are easy thanks to a simple three circuit board design.The Outback M-Series inverter is the superior choice when you need a reliable, powerful and modular true sine wave inverter/charger.The sealed OutBack M-Series inverter/charger is the most rugged design in the world. Conformal coated circuit boards, powder coated die-cast aluminum chassis with gaskets and o-ring seals keep out water and resist corrosion. Simply put, the sealed M-series is designed to work where other inverter/chargers were never intended to go.The turbo model has a modified DC Cover with a ventilation fan built in for better performance.

Features

Powder-coated all aluminum die-cast chassis
Internal electronic components are cooled by heat transfer
Gaskets on all openings to provide water resistance
Sealed design protects internal electronics from salt, dirt or contaminated air, bugs, critters, mold, etc.
Conformal coated circuit boards to resist corrosion
Designed to allow easy field servicing and repair

Specifications
Continuous Output Power: 2000 VA
Continuous Output Current at 25 degrees: 17 amps AC RMS
Output Voltage: 120 VAC/60 Hz
DC Input Voltage (Nominal): 12 VDC
Typical Efficiency: 90%
Output Voltage Regulation: +/-2% typical
Continuous DC Charge Rate: 80 Amps DC
Frequency Range: 54.0-66.0 Hz
DC Input Voltage Range: 10.5-17.0 VDC
Unit Dimensions (LxWxH): 13" x 8.25" x 16.25"
Unit Weight: 56 lbs
Warranty: Standard 2 year/ Optional 5 year

$1,559.00
+$59.00 UPS Ground shipping (Call for different shipping method)