Grid-Tie Solar Kit with Battery Backup
Grid-Tie system with Battery Backup vs. Off-Grid system
A grid tie with battery backup inverter takes current from batteries (DC) and turns it to alternating current (AC) to run any common loads like an off-grid inverter. Unlike an off-grid inverter, when there is an excess of current going to the batteries from solar or wind, the charge controller allows the inverter to sell the excess to the grid like a grid tie inverter instead of wasting the excess energy that the battery bank could not otherwise hold. If there are no demands on the inverter and the batteries are full because of this, then the inverter sells the extra energy that is made by the solar or wind system. When the power goes out, a grid tie with battery backup inverter disconnects from the grid, and supplies any loads tied to it from the existing battery bank, just like an off grid inverter. It will continue providing for those loads until it exhausts the energy stored in the battery bank.
Xantrex XW Power Distribution Panel For Xantrex XW Inverters
The XW Power Distribution Panel with conduit box is factory-wired and labeled to support a code-compliant single-inverter installation. The XW PDP can be configured to mount on either side of the inverter/charger. Internal wiring and breakers can be added to expand the XW System with up to three inverters, four charge controllers, or other equipment to support larger systems, including three-phase.
Designed with consultation and input from industry experts, dealers, and installers, the XW sets a new standard for battery-based inverter/chargers. Integrating the best features available in the market, innovative new features by Xantrex and balance-of-systems components, the XW Hybrid Inverter/Charger’s design makes installation quicker and easier. The XW offers high efficiency and unprecedented surge capacity to maximize the owner’s return on investment. No other inverter/charger looks or performs like the XW.
The XW Power Distribution Panel with conduit box is factory-wired and labeled to support a code-compliant single-inverter installation. The XW PDP can be configured to mount on either side of the inverter/charger. Internal wiring and breakers can be added to expand the XW System with up to three inverters, four charge controllers, or other equipment to support larger systems, including three-phase.
Designed with consultation and input from industry experts, dealers, and installers, the XW sets a new standard for battery-based inverter/chargers. Integrating the best features available in the market, innovative new features by Xantrex and balance-of-systems components, the XW Hybrid Inverter/Charger’s design makes installation quicker and easier. The XW offers high efficiency and unprecedented surge capacity to maximize the owner’s return on investment. No other inverter/charger looks or performs like the XW.
Solar Complete 7.3kW System with Outback GS8048 Hybrid System, 120/240VAC, Off-grid/Grid-tie
|
System description
NOTE: This Complete System Kit IS NOT a factory pre-wired System! It comes in separate boxes and you will have to put it together! It is not hard at all if you follow the instructions and have DIY mentality!
This product offers a complete power conversion system between batteries and AC power. It can provide backup power, sell power back to the utility grid, or provide complete stand-alone off-grid service. This Kit Includes the Following Components:
Optional:
|
Solar Complete 6.1kW System with Xantrex XW6048 Hybrid Inverter, Off-grid/Grid-tie
|
System description
NOTE: This Complete System Kit IS NOT a factory pre-wired System! It comes in separate boxes and you will have to put it together! It is not hard at all if you follow the instructions and have DIY mentality! This product offers a complete power conversion system between batteries and AC power. It can provide backup power, sell power back to the utility grid, or provide complete stand-alone off-grid service. This Kit Includes the Following Components:
|
Grid-Tie 120/240VAC 48VDC 4.5kW with Battery Backup System (9kW/day)
|
This System Includes:
|
Grid-Tie 120/240VAC 24VDC 4kW with Battery Backup System (4.6kWatt/Day)
|
This system includes:
|
Grid-Tie 120VAC 24VDC 3.5W with Battery Backup System (4.6kW/Day)
$5,800
|
This system includes:
|
FLEXpower ONE-3 pre-wired OutBack system includes:
|
|
 |
