Magnum MS4448PAE Complete Kit
Magnum MS4448PAE Inverter/Charger Complete Kit
This Magnum KIT includes:
1 x Magnum MS4448PAE Inverter/Charger, 4400W,
48VDC, Pure Sine Wave
1 x Magnum MMP175-30D Mini Panel (pre-wired) with
175Amp main breaker and two 30Amp breakers
1 x Magnum BP-MMP Back Plate (for easy mounting on a
wall, code approved!)
1 x Magnum ME-ARC50 Advanced Digital LCD Display
Remote Panel with 50' Cable
1 x Magnum MP-HOOD (included with MMP175-30D)
1 x Temperature sensor (included with MS4448PAE)
1 x Magnum ME-BMK-NS Battery monitoring kit
1 x Magnum ME-RC50 Basic Digital LCD Display Remote Panel with 50' Cable (it will replace ME-ARC50, subtract $35)
1 x MidNite Solar Classic 150 (or 200) MPPT charge controller (add $600)
This system comes with 5 year warranty!
NOTE: This is a kit, it comes in 4 different boxes and you will have to put it together (pretty easy, if you follow the instructions)!
MS4448PAE, 120/240VAC Inverter/Charger, 4400W, 48V
The MS-PAE Series Inverter/Charger from Magnum Energy is a pure sine wave inverter designed specifically for the most demanding renewable energy applications. The unique design of the MS-PAE Series provides two 120VAC output lines that are 180° out-of-phase with each other, so that the combination of the L1 and L2 lines total 240VAC and the voltage between either L1 or L2 and neutral is 120VAC, eliminating the need to purchase two units and stack them together to get 240 volts.
When the power requirements of the system are beyond the capacity of a single MS-PAE Series inverter or the system is expanded as more loads are added, up to four MS-PAE Series inverters can be connected together in a parallel configuration. When connecting inverters in parallel, the overall inverter power and surge capacity is increased to power a large single load or more smaller loads.
Available in 4400 (48 volts) watt models, the MS-PAE Series inverters are powerful, easy-to-use and ETL listed to the stringent requirements of UL 1741 and CSA C22.2 No. 107.1-01 for Renewable Energy installations.
MMP175-30D Mini Panel
The MMP (Mini Magnum Panel) has been specifically designed to combine all of the major components required for a renewable energy system — inverter/battery disconnect, AC overcurrent protection, grounding connections, and a full system inverter bypass switch as a convenient way to isolate the inverter for battery maintenance — into a single, easy to install pre-wired enclosure.
Designed for single inverter applications, the MMP enclosure features convenient front panel operation, and with the optional front panel remote, allows you to easily set up, monitor, and operate your Magnum inverter system. In addition to saving time and money by providing a simple and convenient inverter installation, the MMP enclosure ensures safety and reliability by providing a UL and CSA certified and code compliant system.
The BP-MMP is a single-piece, powder-coated steel back plate designed to accommodate the MMP enclosure, a Magnum inverter, and the inverter hood together; making the complete system appear more seamless. Designed with PEM (i.e. internally threaded) nuts, the back plate is shipped with ten ¼-20 x ¾” Hex head bolts for mounting the MMP enclosure, a Magnum inverter, and the inverter hood.
The BP-MMP back plate is also used to provide the necessary requirement to provide a noncombustible mounting surface required when mounting the inverter on a wall.
The ME-RC Remote Control communicates with the inverter to easily operate and monitor your inverter and charger from a remote location. This Remote Control has an easy-to-read LCD screen and displays the inverter/charger status with the “at a glance” LEDs. Soft keys provide simple access to menus and a rotary encoder knob allows you to scroll through and easily configure the adjustable settings in the inverter (or any connected accessory) and maintain the critical settings in nonvolatile memory.
The ME-RC also has the option of controlling the ME-AGS Automatic Gen Start and the ME-BMK Battery Monitor Kit (requires revision 2.0 or higher remote) using a network connection to the inverter. This remote has convenient finger-tip operation, including the new one-knob programming.
The MP-HOOD a single-piece, powder-coated steel cover plate. It is designed to allow a Magnum inverter to be mounted vertically and prevent items from falling into the ventilation openings in the top of the inverter.
Or call for our discounted price!
An alternative Payment method
Idaho residents please choose shipping with Idaho Sales tax added on the Authorize.Net payment form (check out) or your order will not be processed.