http://www.qualitytolast.com/mm1212.html

Magnum MM1212 Inverter/Charger

Magnum Energy Inverter MM1212, 1200 Watts
12 Volt, 70 amp PFC Charger, 12amp tratransfer relay

A remote control is HIGHLY RECOMMENDED with every Magnum Inverter so that the inverter features can be modified and error codes recovered.

The MM Series Inverter/Charger is the cost effective solution for power energy needs.

Cost effective inverter/chargers from Magnum Energy
Introducing the MM Series Inverter/Charger from Magnum Energy - a new modified sine wave inverter providing a cost effective solution for those with smaller power needs in mobile applications. Versatile, easy-to-use and light weight, the MM Series provides a reliable base for your energy system.

Safe and Reliable: The MM Series is ETL Listed to the stringent requirements of UL/cUL 458 and CSA C22.2 #107.1-01 for mobile use.

Attractive Styling:The modern, hourglass case, paired with the die cast aluminum base combines form with functions, creating an attractive unit that uses its base as a heat sink for superior high temperature operation.

Features
You asked and Magnum listened. The MM Series Inverter/Charger is loaded with features.

Choices: Not only does the MM Series come in two power models, but the series offers choices for AC input and output as well. The MM Series offers the choice of an AC pigtail to plug into a dedicated outlet, or you can hardware the unit directly from the AC breaker panel. And choose from a built in 15 amp GFCI outlet or hardwire the AC output directly to a branch AC circuit.
Standard transfer relay: The standard 7 or 16 amp, depending on model, transfer relay will pass AC power through the inverter when using shore or generator power
Versatile Mounting Mount the MM Series on a shelf, bulkhead, or even upside down.
Fan cooled: The MM Series is fan cooled, enabling the unit to work well in confined spaces. If the inverter does exceed its temperature limits, it will automatically shut down and then restart when it cools down.
Low/high battery protection: If your battery voltage reaches below 10 VDC or above 15.5 VDC, the MM Series will automatically shut down.
Current overload protection:The MM Series will automatically shut down if its output wattage is exceeded or it detects a short in the wiring saving the unit from costly damage.
Convenient switches: The MM Series comes with an on/off front-mounted switch with an easy-to-read LED indicator.
Circuit breaker protection: Every model comes with built in input and output circuit breakers for ease of installation
Battery temp sensor: The standard battery temp sensor monitors temperatures from 0 to 50C on all inverter models with a charger.
Buy with ease: The MM Series is backed by a two-year (24 month) parts and labor warranty.

Accessories and Options: Remote Control: Optional remotes are available for the MM Series, including the MM-R, ME-RC and MM-RC. A four wire phone jack comes standard with the unit to connect the remote.

Inverter Specifications
Input battery voltage: 9 to 15.5 VDC
Nominal AC output voltage: 120 VAC +-5%
Output frequency and accuracy: 60 Hz +- 0.005%
1 msec surge current: 42 amps AC
100 msec surge current: 23 amps AC
5 sec surge power: 2100 real watts
10 sec surge power: 1900 real watts
30 sec surge power: 1750 real watts
5 min surge power: 1450 real watts
30 min surge power: 13750 real watts
Continuous power output at 25C (with 1.0 PF): 1200 VA
Continuous current output: 10 amps AC
Rated input battery current: 135 amps DC
Inverter efficiency: 95%
Transfer time: 16 msecs
No Load (120 VAC): 1.3 amps DC
Waveform: Modified Sine Wave

Charger Specifications
Continuous output at 25C: 70 amp AC
Charger efficiency: 88%
Power Factor: > 0.95
Input current at rated output: 9

General Features and Capabilities
Transfer relay capability: 12 AA
Battery temperature compensation: Yes, on models with chargers: standard temp sensor (battery temp 0 to 50C)
Remote available: Yes, MM-RC, ME-RC
Internal cooling: 0 to 59 cfm variable speed
Over-current protection: Yes, with two overlapping circuits
Over-temperature protection: Yes on transformer, and MOSFETS
On/Off with status indicator: Yes, front mounted and easily accessible
Lower battery cutout: 10 VDC, adjustable with the ME-RC remote
AC output and input: Hardwire
Output circuit breaker: 12 amp switchable
Input circuit breaker: 16 amps AC
Listings: ETL listed to UL/cUL 458, CSA C22.2 #107.1-01
Warranty: Two (2) years

Environmental Specifications
Operating temperature: -20C to 60C (-4F to 140F)
Non-operation temperature: -40C to 70C (-40F to 158F)
Operating humidity: 0 to 95% RH non condensing

Physical Specifications
Mounting: Shelf (top or bottom up) or bulkhead (vents up)
Max operating altitude: 15,000' / 4570m
Construction: ABS plastic top and cast aluminum bottom

Dimension (HWD): 16.6" x 8.4" x 4.7" / 420 x 210 x 120 mm
Weight: 20 lb (9 kg)

$570.00
+$29.00 UPS Ground shipping (Call for different shipping)