Magnum MS4448PAE Inverter/Charger
|
Magnum Energy Inverter MS, 4400 watt
48 volt, Pure Sine Wave Inverter/Charger A remote control is HIGHLY RECOMMENDED with every Magnum Inverter so that the inverter features can be modified and error codes recovered. The MS-PAE Series Inverter/Charger from Magnum Energy is a pure sinewave inverter designed specifically for the most demanding renewable energy applications. The unique design of the MS-PAE Series provides two 120VAC output lines that are 180° out-of-phase with each other, so that the combination of the L1 and L2 lines total 240VAC and the voltage between either L1 or L2 and neutral is 120VAC, eliminating the need to purchase two units and stack them together to get 240 volts. When the power requirements of the system are beyond the capacity of a single MS-PAE Series inverter or the system is expanded as more loads are added, up to four MS-PAE Series inverters can be connected together in a parallel configuration. When connecting inverters in parallel, the overall inverter power and surge capacity is increased to power a large single load or more smaller loads. Available in 4000 (24 volts) and 4400 (48 volts) watt models, the MS-PAE Series inverters are powerful, easy-to-use and ETL listed to the stringent requirements of UL 1741 and CSA C22.2 No. 107.1-01 for Renewable Energy installations. Features
Remote Control: For convenient finger-tip operation, including the new one-knob programming. AGS module: Automatically starts and stops your generator based on temperature or battery voltage. Inverter Specifications Input battery voltage: 36 to 68 VDC Nominal AC output voltage: 120/240 VAC Output frequency and accuracy: 60 Hz +- 0.005% Total Harmonic Distortion (THD): <5% 1 msec surge current: Line-Neutral: 120, Line-Line: 70 100 msec surge current: Line-Neutral: 75, Line-Line: 40 5 sec surge power: 8500 real watts 30 sec surge power: 6000 real watts 5 min surge power: 5400 real watts 30 min surge power: 4800 real watts Continuous power output at 25C: 4400 VA Maximum Rated input battery current: 144 ADC Inverter efficiency: 94% Transfer time: 16 msecs Search Module (with remote): < 6 watt No Load (120 VAC output with remote): 25 watts Waveform: Pure Sine Wave Charger Specifications Continuous output at 25C: 60 ADC Charger efficiency: 85% Power Factor: >0.95 Input current at rated output: 17.5 AAC per leg at 120/240 VAC split phase General Features and Capabilities Transfer relay capability: MS2012, MS2812, MS4024: 2 legs at 30a for 120 V/30 A or 240 V/60 A service MS2000: 30 A single input Five stage charging capability: Bulk, Absorb, Float, Equalize, and Battery Saver Battery temperature compensation: with available temp sensor (battery temp 0 to 50C) Remote inverter on/off witch: With available pigtail to connect to dry contact Internal cooling: 0 to 120 cfm variable speed drive using dual 92 mm brushless DC fans Over-current protection: Yes, with two overlapping circuits Over-temperature protection: Yes on transformer, MOSFETS, and battery Conformal coating on PCB's for corrosion protection: yes Powder coated chassis and top for corrosion protection: yes Stainless steel fasteners for corrosion protection: yes Dual AC branch rated output breakers: Optional on the MS2000 and MS2012 - AC breakers in 15 or 20 amp ratings Listings: ETL listed to UL/cUL 458, UL 1741, CSA C22.2 #107.1-01, meets KKK-A-1822E standard Warranty: Three years Environmental Specifications Operating temperature: -20C to 60C (-4F to 140F) Non-operation temperature: -40C to 70C (-40F to 158F) Operating humidity: 0 to 95% RH non condensing Physical Specifications Mounting: Shelf (top or bottom up) or bulkhead (vents up) Max operating altitude: 15,000' / 4570m Dimension (HWD): 13.75" x 12.65" x 8.0" / 349 x 321 x 203 mm Weight: 55 lbs / 24.9 kg |
$2,159.20 FREE SHIPPING Or call for our discounted price!
An alternative Payment method
Idaho residents please choose shipping with Idaho Sales tax added on the Authorize.Net payment form (check out) or your order will not be processed. Related Items
|
