OutBack Off-Grid Inverters
(Pure Sine Wave)
(Pure Sine Wave)
FX Series - Sealed OutBack Inverter/Chargers and VFX Series - Vented OutBack Inverter/Chargers
The new OutBack VFX series is a ventilated version of the original sealed FX series modular "building block" sine wave inverter/charger that can be used for both small and large power systems. By allowing cooler outside airflow through the internal electronics, more AC power is available and operation in extremely hot environments is improved compared to the sealed FX series.
Each OutBack FX or VFX inverter/charger is a complete power conversion system - DC to AC inverter, battery charger and AC transfer switch. Additional FX (or VFX) inverter/chargers can be connected at any time in parallel (120 VAC), series (120/240 VAC), or three-phase (120Y208 VAC) configurations. This allows a system to be tailored to meet the specific power conversion requirements of the application, both at the time of the installation and in the future. With the addition of an auto- transformer, the single phase 120VAC can be brought to 240VAC single phase. Especially this is useful if you have a well pump which requires 240VAC single phase.
Like the FX series, the OutBack VFX is also designed to survive harsh environments around the world. The full-sreened vent openings are "bug proof" and the die-cast aluminum chassis protects and keeps the power conversion components cool in very hot environments even when operated at high power for extended periods. The VFX can be used in high ambient applications up to 60°C (with reduced output ratings).
The transfer switch is rated for 60 amps. When external source of AC power (either a generator of the utility grid) is detected the "AC" terminal on the inverter, the switch operates to transfer the loads to the external power source, and then activates the battery charger to re-charge the battery bank.
The new OutBack VFX series is a ventilated version of the original sealed FX series modular "building block" sine wave inverter/charger that can be used for both small and large power systems. By allowing cooler outside airflow through the internal electronics, more AC power is available and operation in extremely hot environments is improved compared to the sealed FX series.
Each OutBack FX or VFX inverter/charger is a complete power conversion system - DC to AC inverter, battery charger and AC transfer switch. Additional FX (or VFX) inverter/chargers can be connected at any time in parallel (120 VAC), series (120/240 VAC), or three-phase (120Y208 VAC) configurations. This allows a system to be tailored to meet the specific power conversion requirements of the application, both at the time of the installation and in the future. With the addition of an auto- transformer, the single phase 120VAC can be brought to 240VAC single phase. Especially this is useful if you have a well pump which requires 240VAC single phase.
Like the FX series, the OutBack VFX is also designed to survive harsh environments around the world. The full-sreened vent openings are "bug proof" and the die-cast aluminum chassis protects and keeps the power conversion components cool in very hot environments even when operated at high power for extended periods. The VFX can be used in high ambient applications up to 60°C (with reduced output ratings).
The transfer switch is rated for 60 amps. When external source of AC power (either a generator of the utility grid) is detected the "AC" terminal on the inverter, the switch operates to transfer the loads to the external power source, and then activates the battery charger to re-charge the battery bank.
|
Sealed FX
|
Vented VFX
|
OutBack FX2012T
|
OutBack FX2524T
Sealed, 2500 watt, 24VDC, 120VAC, 60Hz, 55A charger, turbo included
$1,635.00 |
OutBack FX3048T
|
|
M-SERIES
Mobile/Marine True Sinewave Inverter/Charger
Inverters with an M-suffix are an RV/marine version. They have a transfer switch that switches hot and neutral.
Mobile/Marine True Sinewave Inverter/Charger
Inverters with an M-suffix are an RV/marine version. They have a transfer switch that switches hot and neutral.
OutBack FX2012MT
|
OutBack FX2524MT
Sealed, 2500 watt, 24VDC, 120VAC, 60Hz, 55A charger, turbo included
$1635.00 |
OutBack FX2536MT
|
E-Series, Export versions, 230VAC, 50Hz
OutBack FX2012ET
Sealed, 2000 watt, 12VDC, 230VAC, 50Hz, 100A charger, turbo included
$1,350.00 |
OutBack FX2024ET
Sealed, 2000 watt, 24VDC, 230VAC, 50Hz, 55A charger, turbo included
$1,350.00 |
OutBack FX2348ET
Sealed, 2000 watt, 48VDC, 230VAC, 50Hz, 35A charger, turbo included $1,350.00 |
|
OutBack Extreme Mobile Inverter/Chargers (Military grade rugged mobile, pure sine wave)
The OutBack Extreme Series Inverter/Charger is a highly reliable all-in-one power solution. Incorporating rugged components not available in regular "commercial off the shelf" inverter/chargers, the OutBack Extreme Series Inverter/Charger can survive harsh environmental conditions including extreme shaking and vibration.
Our true sinewave inverter/charger uses intelligent battery charging and has an integrated AC transfer switch with automatic neutral/ground switching for mobile applications. The OutBack Extreme Series Inverter/Charger produces low distortion AC power for all of your mobile electrical needs and industry leading surge power starts multiple heavy loads simultaneously.
The OutBack Extreme Series Inverter/Charger is designed to meet your needs today, tomorrow and in the future. Our integrated building block architecture allows you to expand your system from 2 to 36 kW and user defined settings allow your system to operate at 120 VAC, 120/240 VAC or 120Y208 VAC three-phase by stacking multiple inverter/chargers together. Water Resistant. Standard 1 Year Warranty.
The OutBack Extreme Series Inverter/Charger is a highly reliable all-in-one power solution. Incorporating rugged components not available in regular "commercial off the shelf" inverter/chargers, the OutBack Extreme Series Inverter/Charger can survive harsh environmental conditions including extreme shaking and vibration.
Our true sinewave inverter/charger uses intelligent battery charging and has an integrated AC transfer switch with automatic neutral/ground switching for mobile applications. The OutBack Extreme Series Inverter/Charger produces low distortion AC power for all of your mobile electrical needs and industry leading surge power starts multiple heavy loads simultaneously.
The OutBack Extreme Series Inverter/Charger is designed to meet your needs today, tomorrow and in the future. Our integrated building block architecture allows you to expand your system from 2 to 36 kW and user defined settings allow your system to operate at 120 VAC, 120/240 VAC or 120Y208 VAC three-phase by stacking multiple inverter/chargers together. Water Resistant. Standard 1 Year Warranty.
OBX-IC2524P-120/60
2500W, 24VDC, 120VAC/60Hz, 55A charger, Neutral Ground Switched $2,250.00 |
OBX-IC2024P-230/50
2000W, 24VDC, 230VAC/50Hz, 55A charger, Non-Neutral Ground Switched, (export)
$2,550.00 |
OBX-IC2024S-120/60
2000W, 24VDC, 120VAC/60Hz, 55A charger, Neutral Ground Switched, water resistant $2,700.00 |
|
Radian Series GS8048 (pure sine wave).
The new OutBack Power Radian Series GS8048 inverter/charger provides a comprehensive answer for Grid-interactive and Standalone power systems.Outback's new Radian inverter works equally well as a grid tie or off-grid inverter. There are two separate AC inputs, one for the bi-directional grid connection and one for a back-up generator. There is a built-in 50 A transfer switch at 120/240 VAC.
AC surge output: 12000W
The output is 120/240 VAC split phase in each unit for easy tie-in to US standard wiring and grid connections. The Radian features 8 kW of continuous output power and can support large dynamic load variations and surge loads, making it well-suited for demanding commercial applications as well as residential use. With two power stages, it is able to provide high efficiency and redundancy for critical applications, and the modular design is field serviceable. The Radian can be parallel stacked with up to 10 inverters for 80 kW total output. The Radian also has auxiliary controls which include a contact closure, a 12 VDC output signal and terminals for a remote on/off switch.
The inverter comes with a standard 5-year warranty. An optional 10-year extended warranty is available where required by state incentive programs. The Radian is for indoor use only.
Dimensions are 28"H x16"W x 8.7"D. Weight is 125lbs. Listed to UL 1741 for U.S. and Canada.
You will also need a Mate 3, Hub 4 or 10, RTS, and an appropriate GSLC (below) to complete a Radian system. Shipping weight is 140 lbs.
The new OutBack Power Radian Series GS8048 inverter/charger provides a comprehensive answer for Grid-interactive and Standalone power systems.Outback's new Radian inverter works equally well as a grid tie or off-grid inverter. There are two separate AC inputs, one for the bi-directional grid connection and one for a back-up generator. There is a built-in 50 A transfer switch at 120/240 VAC.
AC surge output: 12000W
The output is 120/240 VAC split phase in each unit for easy tie-in to US standard wiring and grid connections. The Radian features 8 kW of continuous output power and can support large dynamic load variations and surge loads, making it well-suited for demanding commercial applications as well as residential use. With two power stages, it is able to provide high efficiency and redundancy for critical applications, and the modular design is field serviceable. The Radian can be parallel stacked with up to 10 inverters for 80 kW total output. The Radian also has auxiliary controls which include a contact closure, a 12 VDC output signal and terminals for a remote on/off switch.
The inverter comes with a standard 5-year warranty. An optional 10-year extended warranty is available where required by state incentive programs. The Radian is for indoor use only.
Dimensions are 28"H x16"W x 8.7"D. Weight is 125lbs. Listed to UL 1741 for U.S. and Canada.
You will also need a Mate 3, Hub 4 or 10, RTS, and an appropriate GSLC (below) to complete a Radian system. Shipping weight is 140 lbs.
OutBack Radian GS8048 Inverter/Charger 8KW 120/240VAC
Weight 125 lbs AC output volts 120V/240V 60Hz Battery voltage 48 VDC No load draw 30 W Charger amps 115 A Continuous watts 8000
$4,099.00
$4,099.00
|
 |
