http://www.qualitytolast.com/xw-power-distribution-panel.html

Xantrex XW Power Distribution Panel

Xantrex XW Power Distribution Panel with Xantrex XW4024 Inverter (not included)

Xantrex XW Power Distribution Panel For XW4024, XW4548, XW6048 Inverter Systems, XW-PANEL

The XW Power Distribution Panel (XW PDP) with conduit box is factory-wired and labeled to support a code-compliant single-inverter installation. The XW PDP can be configured to mount on either side of the inverter/charger. Internal wiring and breakers can be added to expand the XW System with up to three inverters, four charge controllers, or other equipment to support larger systems.

Accommodates both AC and DC breakers and wiring for three XW Hybrid Inverter/Chargers and four XW Solar Charge Controllers
Includes breakers and wiring to connect to XW Hybrid Inverter/Charger
Wiring is labeled and cut-to-length, ready to connect to inverter
Uses flexible Arctic Ultraflex Blue™ wires
Multiple knockouts on sides, top, bottom and back of unit
Includes mounting back plate and and XW Conduit Box

The SW Power Distribution Panel (XW PDP) is factory-wired and labeled to support a code-compliant single-inverter installation. It has plenty of room to add wiring and breakers to expand the XW System with up to three inverters, four charge controllers, or other equipment to support 120/1240-volt, three-wire, single-phase systems. With a field-reversible door and multiple conduit knockout locations, the PDP can be configured to mount on either side of the inverter/charger.

The XW Power Distribution Panel (XW PDP) is designed to save significant time and money during installation, taking less than 25 percent of the time to install, when compared to competing solutions. A mounting plate and XW Conduit Box is supplied with each XW PDP.

Product Compatibility

The distribution panel and conduit box interface with the following products:

XW Connection Kit (for second XW Hybrid Inverter/Charger) and XW Conduit Box
XW4024, XW4548, and XW6048 Inverter/Chargers
XW Solar Charge Controllers (requires customer-supplied breakers and wiring)
C-Series Charge Controllers (requires customer-supplied breakers and wiring)

XW PDP dimensions (HWD) 30" x 16" x 8.25" (761 x 406 x 210 mm)
Shipping Dimensions (HWD) 48" x 21" x 13.5" (1220 x 533 x 343 mm)
Shipping weight: 67.2 lbs (30.5 kg)

XW PDP ships with
Power Distribution Panel enclosure with a field-reversible panel door, pre-wired with:

Three 60 amp 120/240 Vac, two-poles, Square-D, Type QOU, DIN-rail mounted AC breakers for AC input, Bypass, and AC Load
One GJ250A 160 Vdc, 3/8" stud DC breaker
One ground terminal bus bar
One neutral terminal bus bar
One battery negative terminal bus bar
One pair #4/0 AWG Arctic Ultraflex BlueTM Battery Cables (factory installed and labeled, ready to connect
#6 AWG Arctic Ultraflex BlueTM AC wiring (factory installed and labeled, ready to connect)
Room to expand - Five additional AC breaker positions for two-poles, 60 A Square D, Type QOU breakers; 10 additional DC breaker positions (eight for charge controller breakers and two for large GJ inverter breakers
Mounting Plate
XW Conduit Box

$1,259.00
+FREE SHIPPING

Credit Card Merchant

An alternative Payment method
Idaho residents please choose shipping with Idaho Sales tax added on the Authorize.Net payment form (check out) or your order will not be processed.